Background

On 20 December 2022, 3M announced it would exit PFAS manufacturing by the end of 2025, including Novec™ and Fluorinert™ fluids. If you use these fluids for cleaning, vapor degreasing, carrier applications or heat transfer, you can choose an ASI-made alternative, or a Chemours Opteon™ fluid, including Opteon™ SF80 and Opteon™ SF33.

ASI Technologies offers its own fluorinated fluids for those application families, and it is also the Chemours representative in Israel. The products below are available on the site, with a link to the product page and to the datasheet.

Why switch now

  • The end of 3M production of Novec™ and Fluorinert™ is a reason to plan ahead, so the line keeps running without interruption.
  • ASI has its own fluids for precision cleaning, vapor degreasing, heat transfer, and use as a carrier fluid or coating solvent.
  • ASI Technologies is the Chemours representative in Israel, and also offers Opteon™ fluids, including Opteon™ SF80 and Opteon™ SF33. This is a different chemistry, so a process compatibility check is required.
  • Process, material and equipment fit are checked together against the product datasheet.

Alternatives at a glance

The table summarizes ASI fluids by the Novec™ or Fluorinert™ grade used on the line, and the typical application. ASI-3280 is an additional ASI fluid for single-phase heat transfer. Details for each product follow, and the Chemours Opteon™ fluids available in Israel are described after that.

Novec™ / Fluorinert™ product ASI alternative Typical application Boiling point
Novec™ 71IPA ASI 71IPA Precision cleaning, rinsing and drying 54.8°C
Novec™ 7100 ASI 7100 Precision cleaning, coating solvent and heat transfer 61°C
Novec™ 7200 ASI 7200    
Novec™ 72DE ASI 72DE Vapor degreasing and defluxing 43°C
Novec™ 73DE ASI-73DE Heavy-duty vapor degreasing and carrier use 48°C
Fluorinert™ FC-3283 ASI 3283S Heat transfer, testing and high-temperature cleaning 128°C
  ASI-3280 Single-phase heat transfer  

ASI fluids

ASI 71IPA

ASI 71IPA is an ASI alternative for applications that used Novec™ 71IPA. It is a fluorinated fluid for light-duty precision cleaning, rinsing and drying. It is suited to removing oils, greases, waxes and fingerprints, and to cleaning flux residues when used with a co-solvent. The boiling point is 54.8°C.

Product page · Datasheet

ASI 7100

ASI 7100 is an ASI alternative for applications that used Novec™ 7100. It is used for precision cleaning of electronics and semiconductor components, as a solvent for anti-fingerprint coatings, and for heat transfer in semiconductor processes. The boiling point is 61°C.

Product page · Datasheet

ASI 7200

ASI 7200 is an ASI alternative for applications that used Novec™ 7200. Further details and help matching the fluid to your process are on the product page.

Product page

ASI 72DE

ASI 72DE is an ASI alternative for applications that used Novec™ 72DE. It is a stable blend for medium- to heavy-duty vapor degreasing and defluxing, and for specialty solvent uses such as coating and lubricant deposition. The boiling point is 43°C.

Product page · Datasheet

ASI-73DE

ASI-73DE is an ASI alternative for applications that used Novec™ 73DE. It is a fluorinated solvent for heavy-duty vapor degreasing and immersion cleaning, to remove oils, greases, waxes, fluxes and particulates. It can also be used as a carrier fluid for specialty coatings or drying. The boiling point is 48°C.

Product page · Datasheet

ASI 3283S

ASI 3283S is an ASI alternative for applications that used Fluorinert™ FC-3283. It is a thermally stable perfluorinated liquid for heat transfer and testing, and for cleaning electronic products at high temperature. The boiling point is 128°C.

Product page · Datasheet

ASI-3280

ASI-3280 is a perfluorocarbon fluid for single-phase heat transfer, including semiconductor equipment, dielectric cooling and general thermal management. Its liquid range is -50°C to 112°C.

Product page · Datasheet

Chemours Opteon™ fluids in Israel

ASI Technologies is the Chemours representative in Israel. We offer Chemours Opteon™ fluids in Israel, including Opteon™ SF80 and Opteon™ SF33, as alternatives for applications that used Novec™ and Fluorinert™ fluids. This is a different chemistry (HFO), so process, material and equipment fit are checked together against the product datasheet.

Opteon™ SF80

Opteon™ SF80 is a Chemours fluid for vapor degreasing and high-solvency precision cleaning. The Kb value is 99, the boiling point is 47°C, and it is nonflammable. According to Chemours, GWP is below 2.5, and SF80 can replace TCE, nPB, perchloroethylene, methylene chloride, as well as HCFC-225, HCFC-141b and HFEs. It is also used for oil and grease removal, high-solvency defluxing including RMA residues, silicone removal and cold cleaning.

Product page

Opteon™ SF33

Opteon™ SF33 is a Chemours HFO fluid for precision and electronics cleaning, for use as an aerosol solvent and carrier fluid, and for two-phase direct-to-chip cooling. It is nonflammable, the boiling point is 33.4°C, the Kb value is 11.3, GWP is 2 and ODP is 0. According to Chemours, it can replace PFCs, HCFCs, PFPEs, HFCs and HFEs in industrial solvent applications. Where high solvency is needed, such as heavy oils or flux, the product page recommends Opteon™ SF80.

Product page

Opteon™ SF01

Opteon™ SF01 is a Chemours solvent cleaning fluid for removing particles, ionic contamination and light soils in precision cleaning. It is also used for vapor degreasing, cold cleaning, co-solvent rinsing, as an aerosol solvent, as a drying agent and as a heat transfer fluid. The boiling point is 32°C, it is classified as a nonflammable liquid, and GWP is below 10.

Product page

How to choose

When you select a fluid, check these points against the datasheet and your process:

  • Boiling point and drying speed
  • Solvency versus the type of soil
  • Compatibility with metals, plastics and elastomers
  • The chemical family, for example an ASI fluid versus an Opteon™ HFO fluid
  • Fit with existing equipment, such as a degreaser or a cooling system

FAQ

Where can I buy Opteon™ SF80 in Israel?

ASI Technologies is the Chemours representative in Israel, and supplies Opteon™ SF80 in Israel. You can read the product page, or contact the ASI team at +972-8-3760650, through the contact form, or by email at contact@asi-tech.co.il.

What is the difference between an ASI fluid and Opteon™ SF80 or Opteon™ SF33?

ASI-made fluids are alternatives for applications that used Novec™ and Fluorinert™. Chemours Opteon™ fluids, including Opteon™ SF80 and Opteon™ SF33, are alternatives in a different chemistry (HFO). Process fit is checked against the datasheet, without assuming a one-to-one changeover.

How do I start an evaluation?

Contact the ASI team at +972-8-3760650 or through the contact form, and we will match the fluid to your process together.

Contact us

We will be glad to match a fluid to your process, whether it is an ASI fluid or Opteon™ SF80 or another Opteon™ fluid. Contact the ASI team at +972-8-3760650, through the contact form, or by email at contact@asi-tech.co.il.

Novec™ and Fluorinert™ are trademarks of 3M. Opteon™ is a trademark of Chemours.

ASI Technologies