Orissa Synchrodex Pro Advanced Inline Selective Soldering System - Pillarhouse

Modular inline selective soldering with offline programming

Item Number: 9483

The Orissa Synchrodex Pro is a modular, high-precision inline selective soldering system optimized for high-mix, high-performance production environments.

It handles PCBs up to 1200 × 610 mm and can be configured with single or dual solder baths, allowing simultaneous processing of multiple boards or nozzle configurations, enhancing flexibility and throughput.

The standard solder module features an onboard Drop-Jet fluxer, with optional infrared or convection pre-heating (top and bottom) controlled by closed-loop pyrometer. Modules can be dedicated specifically for fluxing or pre-heating to further streamline production.

Compatible with all Pillarhouse soldering technologies, including patented 1.5 mm Micro Nozzle, Jet Wave, AP-1, and custom multi-dip. Rapid, non-contact solder pot exchange is facilitated by an optional heated pot trolley.

The Synchrodex Pro operates with PillarCOMM.NET software, a Windows®-based "Point & Click" interface supporting offline programming using Gerber data, ensuring quick setup, precise control, and seamless Industry 4.0 integration.

 

 

For more details and reservations click here
Parameter Value
Height 1391mm / 55” – excluding light stack and monitor
Width 1060mm / 42“ or 1600mm / 63” (depending on frame size)
Depth 2250mm / 88”
Board Size Min: 102 × 102 mm / 4” × 4”
Max (standard): 420 × 610 mm / 16.5” × 24”
Optional: 610 × 610 mm / 24” × 24” and 1200 × 610 mm / 45” × 24”
Edge Clearance 3 mm above/below
Height Clearance 45 mm above / 40 mm below (nominal)
Extraction Fan Diameter: 236 mm
Extraction Rate 940 m³/hr / 553 CFM
Supported Solder Types All commonly used types, including lead-free
Solder Pot Capacity 11 kg / 24 lb (standard), up to 20 kg / 44 lb (large)
Nozzles / Applicators Micro Nozzle: 1.5–2.5 mm | AP Style: 2.5–16 mm dia.
Extended AP: 2.5–16 mm | Jet-Tip: 6–25 mm
Jet-Wave: up to 40 mm width | Wave: 75 mm / 150 mm
Custom nozzles available upon request
Flux System Drop-Jet, low-maintenance. Low solids (<8%), no-clean, pressurized & inerted. Optional ultrasonic system
Axis Resolution (X/Y/Z) 0.15 mm
Repeatability ±0.05 mm
Nitrogen Supply Pressure 5 bar / 72 psi
Nitrogen Consumption 30–100 L/min (1.06–3.53 CFM) – dependent on nozzle configuration
Nitrogen Purity ≥ 99.995%
Air Supply Pressure 5 bar / 72 psi
Air Consumption 10 L/min / 0.35 CFM
Power Supply Three-phase + Neutral + PE
Voltage 230 V (phase to neutral) / 400 V (phase to phase)
Frequency 50 / 60 Hz
Power Consumption Configuration dependent
Transport System Conveyor (IPC-SMEMA-9851 compliant)
Programming Software PillarCOMM.NET – Windows®-based ‘Point & Click’ interface