Ultra-flexible, offline, multi-platform selective soldering system
Designed to meet the needs of the small batch manufacturer who requires high levels of production flexibility. The Jade PRO offers the ability to regularly change solder alloys without incurring expensive down time, whilst the solder bath cools down and heats up during a regular manual changeover process.
The Jade PRO is a hand load system, incorporating a universally adjustable tooling carrier capable of accommodating PCBs or pallets up to 457x508mm.
In its basic format, the Jade PRO is configured with a single solder bath. In the Jade PRO Duplex guise, the machine can be configured with twin adjacent solder baths on independent Z axis drives. This achieves increased production flexibility by permitting use of two different nozzle tip sizes which can be allocated as process requirements dictate within any particular area on a PCB.
All of the above Jade PRO configurations can be offered with optional automatic heated solder bath change stations. Using this system the non-operational solder bath and pump system is stationed at one of two heated park positions located at either side of the main machine.
This heated station maintains the correct solder temperature within the bath that is idle, so that when changeover occurs, the replacement bath can resume immediate production. A single automatic solder bath change station is identified as a PLUS configuration, whilst twin stations (located at both sides of the machine) are identified as PLUS PLUS configurations.
On this basis Duplex machines with the PLUS PLUS identity will operate with 4 individual solder bath and pump systems.
The Jade PRO series is controlled by a PC, through PillarCOMM, a Windows® based ‘Point & Click’ interface with a PCB image display.
Additionally our PillarPAD offline programming package allows the operator to produce programs independently from the machine using Gerber data.
Standard Features:
- Integral PC and machine mounted TFT monitor
- Auto motorised wire solder feed & level detect
- Solder bath coding – identifies correct bath for program
- Manual fiducial correction system
- Solder wave height measurement and correction
- Process viewing camera(s)
- Multilevel password protection
- Six AP style solder nozzle tips
- Colour programming camera
- PillarPAD offline programming system
- Universally adjustable tooling carrier
- Thermal nozzle calibration system using integrated setting camera – requires manual correction
- PillarCOMM Windows® based ‘Point & Click’ interface
Monitoring Options
- Flux presence sensor – thermistor style
- Flux spray, flow and spray & flow
System Options
- Side mounted auto bath changeover – PLUS configuratio
- Top-side instant IR preheat
- Bottom-side slide in / out instant IR preheat
- Closed loop pyrometer temperature control
- Bottom side hot Nitrogen selective preheat
- Automatic fiducial correction
- Dual Drop-Jet / ultrasonic fluxing
- Laser PCB warp correction
- Twin solder bath capability on independent Z axis
- Large solder bath for dedicated single dip applications
- Solder bath removal trolley
- Solder reel identification