Pillarhouse - Jade MKII, Single Point Selective Soldering System

Entry single-point selective soldering system

Item Number: 4797

Entry-level single point selective soldering system

Designed to meet the needs of the small/medium batch manufacturer who requires high levels of production flexibility, the Jade MKll entry-level system offers uncompromised selective soldering quality at a very low cost.

The Jade MKII is a hand load system, incorporating a universally adjustable tooling carrier capable of accommodating PCB’s or pallets up to 457 x 508mm.

Our patented Drop-Jet design fluxer offers quick and effective flushing of the pressurized flux chamber. This helps to keep maintenance levels to a minimum whilst enabling use of higher solid content fluxes as well as water-soluble fluxes.

As with all Pillarhouse systems, the soldering process is enhanced by a hot Nitrogen curtain which provides an inert atmosphere. This method of soldering also assists in the prevention of oxidization and provides a local preheat to the joint, thus reducing thermal shock to localized components.

The Jade MKII is controlled by a PC, through PillarCOMM, a Windows® based ‘Point & Click’ interface with PCB image display.

Standard Features

    • Integral PC and machine mounted TFT monitor
    • Inerted Nitrogen system
    • Auto solder top-up (wire feed) & solder level detect
    • Drop-Jet fluxer
    • Set of AP style solder nozzle tips
    • Internal fume extraction
    • Colour programming camera
    • Solder wave height measurement and correction
    • Universally adjustable tooling carrier
    • Thermal nozzle calibration system using integrated setting camera (requires manual correction)
    • PillarCOMM Windows® based ‘Point & Click’ interface
    • Multiple level password protection
    • Manual fiducial correction
    • Lead-free compatible
    • Day-to-day service kit


Monitoring Options

    • Flux presence sensor – thermistor style
    • Flux spray, flow and spray & flow
    • Pump rpm
    • O2 ppm
    • Nitrogen flow


System Options

    • Top-side instant IR preheat
    • Closed loop temperature control – via pyrometer or thermocouple
    • Bottom-side IR ring heater
    • Bottom-side hot Nitrogen selective preheat
    • Automatic fiducial correction
    • Ultrasonic fluxing
    • Dual Drop-Jet / ultrasonic fluxing
    • Laser PCB warp correction
    • Micro nozzle assembly
    • Solder reel identification
    • Rapid change solder bath and pump system capability – does not include solder bath and pump
    • Solder bath coding – identifies correct bath for program – only suitable for use with rapid change solder bath and pump system
    • Encoders on X, Y and Z axis
    • Larger PCB handling size
    • Nitrogen generator


P/N 62212

For more details and reservations click here
Height 1403mm - excluding light stack
Width 1000mm
Depth 1351mm
Board size 457mm x 508mm (larger PCB size available upon request)
Edge clearance Above / below 3mm
Height clearance

Above / below 40mm nominal

Above 190mm – special application

Solder Most commonly used solder types – including lead-free
Solder pot capacity 8kg
Applicators AP style – 2.5mm to 16mm dia.
Extended AP style – 2.5mm to 20mm dia.
Micro nozzle – 1.5mm to 2.5mm
Jet-Tip style – 6mm to 20mm dia.
Jet-Wave nozzle – up to 25mm width
Special dedicated nozzles available upon request
Flux Low maintenance Drop-Jet system. Low solids (below 8%), no clean flux, pressurized and inerted system, optional water soluble system available
X, Y & Z Axis resolution 0.1mm
Repeatability +/- 0.05mm
Nitrogen usage 35 litres gas/min. 5 bar pressure
Nitrogen purity 99.995% or better
Air supply pressure 5 bar / 72 psi
Power supplies Single phase + PE
Voltage

208V – 250V

Frequency

50/60Hz

Power 4kVA
Power with IR preheat 6.5kVA – Top-side
8kVA – Top with bottom-side ring heater
Transport Hand load
Tooling: Integral adjustable board guides, includes finger extensions and board clamps
Programming PillarCOMM Windows® based ‘Point & Click’ interface
Relevant Documents
UK-Jade-Brochure UK-Jade-Brochure
✖

Receiving a document by email

Fill in your details and the file will be sent directly to your email address.